topic rtsp-url-tester RTSP URL & Camera Test
Test your topic rtsp-url-tester camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The topic rtsp-url-tester uses RTSP path pattern rtsp://.
topic RTSP URL pattern
The RTSP URL pattern for topic rtsp-url-tester cameras:
rtsp://<user>:<pass>@<ip>:554/stream
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- RTSP: 554
Test your topic camera stream
Paste your topic RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
How do I test an RTSP URL?
Enter your RTSP URL in the CamCheck tool above and click Test. The tool will attempt to connect to the stream, report reachability, codec, resolution, and frame rate. Common RTSP URL format: rtsp://user:pass@ip:554/stream.
What RTSP ports are standard?
The standard RTSP port is 554. Some cameras use non-standard ports: Foscam uses 88, some Reolink models use 8554. Always check your camera's manual or network settings for the actual RTSP port.