Reolink Camera RTSP URL Guide & Tester
Test any Reolink IP camera stream instantly. Reolink cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Reolink RTSP URL pattern
The RTSP URL pattern for Reolink cameras:
rtsp://<user>:<pass>@<ip>:554/h264Preview_01_main
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 8000
- RTSP: 554
ONVIF path
Reolink cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Reolink camera stream
Paste your Reolink RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What NVR systems work with Reolink cameras?
Reolink cameras with ONVIF support work with any ONVIF-compatible NVR or VMS, including Synology Surveillance Station, Milestone XProtect, Genetec, and Blue Iris. Native Reolink NVRs offer tighter integration with features like smart motion analytics.
Does Reolink have its own NVR?
Yes, Reolink offers brand-native NVR systems that provide the deepest integration with Reolink cameras, including smart motion detection, deep learning analytics, and unified management. Third-party ONVIF NVRs work for basic recording but may miss proprietary features.