Hikvision Camera RTSP URL Guide & Tester
Test any Hikvision IP camera stream instantly. Hikvision cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Hikvision RTSP URL pattern
The RTSP URL pattern for Hikvision cameras:
rtsp://<user>:<pass>@<ip>:554/Streaming/Channels/101
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Hikvision cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Hikvision camera stream
Paste your Hikvision RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the default RTSP URL format for Hikvision cameras?
The Hikvision RTSP URL format is: rtsp://
What port does Hikvision use for RTSP?
Hikvision cameras use RTSP port 554 by default. Some models may use non-standard ports — check the camera web interface under Network > RTSP Settings. Open TCP port 554 on your firewall for remote RTSP access.