Dahua Camera RTSP URL Guide & Tester
Test any Dahua IP camera stream instantly. Dahua cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Dahua RTSP URL pattern
The RTSP URL pattern for Dahua cameras:
rtsp://<user>:<pass>@<ip>:554/cam/realmonitor?channel=1&subtype=0
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Dahua cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Dahua camera stream
Paste your Dahua RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the default RTSP URL format for Dahua cameras?
The Dahua RTSP URL format is: rtsp://
What port does Dahua use for RTSP?
Dahua cameras use RTSP port 554 by default. Some models may use non-standard ports — check the camera web interface under Network > RTSP Settings. Open TCP port 554 on your firewall for remote RTSP access.