Amcrest Camera RTSP URL Guide & Tester
Test any Amcrest IP camera stream instantly. Amcrest cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Secure your camera admin login
IP cameras ship with factory default credentials for initial setup only. Leaving default credentials active on any network-connected device is a serious security risk — attackers actively scan for and exploit cameras with unchanged defaults.
- Log in to the camera web interface using the initial setup credentials (check the sticker on the camera body or the quick-start guide).
- Navigate to Configuration → User Management (menu names vary by firmware version).
- Set a strong, unique password — at least 12 characters, mixing letters, numbers, and symbols. Do not reuse passwords across devices.
- Save and log back in with the new credentials to confirm the change took effect.
- Update your RTSP URL with the new credentials, then use CamCheck below to verify the stream is still accessible.
Amcrest RTSP URL pattern
The RTSP URL pattern for Amcrest cameras:
rtsp://<user>:<pass>@<ip>:554/cam/realmonitor?channel=1&subtype=0
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Amcrest cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Amcrest camera stream
Paste your Amcrest RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the default IP address for Amcrest cameras?
Amcrest cameras typically use DHCP by default, obtaining an IP address from your router. Use SADP (Hikvision/Dahua), ConfigTool, or a network scanner to find the camera IP. Some brands also assign a default static IP during initial setup.
How do I access the Amcrest camera web interface?
Open a web browser and navigate to http://