Wyze Camera RTSP URL Guide & Tester
Test any Wyze IP camera stream instantly. Wyze cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Wyze RTSP URL pattern
The RTSP URL pattern for Wyze cameras:
rtsp://<user>:<pass>@<ip>:554/live
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- RTSP: 554
Test your Wyze camera stream
Paste your Wyze RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What ports do I need to forward for Wyze cameras?
For Wyze RTSP streaming: forward TCP 554. For web interface: TCP 80 or 443. For ONVIF: TCP 80. Consider using a VPN instead of direct port forwarding — it provides stronger security without exposing camera ports to the internet.
Is port forwarding safe for Wyze cameras?
Direct port forwarding exposes Wyze cameras to internet-wide scanning and brute force attacks. Mandatory steps before enabling port forwarding: (1) change default password, (2) update firmware, (3) disable unused services. A VPN or cloud relay is safer for most users.