Wyze Camera RTSP URL Guide & Tester
Test any Wyze IP camera stream instantly. Wyze cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Wyze RTSP URL pattern
The RTSP URL pattern for Wyze cameras:
rtsp://<user>:<pass>@<ip>:554/live
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- RTSP: 554
Test your Wyze camera stream
Paste your Wyze RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the ONVIF endpoint for Wyze cameras?
Wyze cameras use the ONVIF endpoint at /onvif/device_service on port 80. You can verify ONVIF connectivity using the CamCheck tool above. Enable ONVIF in the camera web interface if it is not active by default.
Does Wyze support ONVIF Profile S and G?
Wyze cameras support ONVIF Profile S (streaming) and most support Profile G (recording) and Profile T (H.265 + metadata). Check the Wyze product specifications page for the exact ONVIF profiles supported by your model.