Ubiquiti Camera RTSP URL Guide & Tester
Test any Ubiquiti IP camera stream instantly. Ubiquiti cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Ubiquiti RTSP URL pattern
The RTSP URL pattern for Ubiquiti cameras:
rtsps://<host>/<channel-id>
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTPS: 443
- RTSP: 7447
- UNIFI_PROTECT: 443
Test your Ubiquiti camera stream
Paste your Ubiquiti RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the ONVIF endpoint for Ubiquiti cameras?
Ubiquiti cameras use the ONVIF endpoint at /onvif/device_service on port 80. You can verify ONVIF connectivity using the CamCheck tool above. Enable ONVIF in the camera web interface if it is not active by default.
Does Ubiquiti support ONVIF Profile S and G?
Ubiquiti cameras support ONVIF Profile S (streaming) and most support Profile G (recording) and Profile T (H.265 + metadata). Check the Ubiquiti product specifications page for the exact ONVIF profiles supported by your model.