Reolink RLK16-826B8 RTSP URL & Camera Test
Test your Reolink RLK16-826B8 camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Reolink RLK16-826B8 uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Reolink RTSP URL pattern
The RTSP URL pattern for Reolink RLK16-826B8 cameras:
rtsp://<user>:<pass>@<ip>:554/h264Preview_01_main
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 8000
- RTSP: 554
ONVIF path
Reolink cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Reolink camera stream
Paste your Reolink RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Reolink RLK16-826B8?
The Reolink RLK16-826B8 uses RTSP URL: rtsp://
What are the default ports for the Reolink RLK16-826B8?
Reolink RLK16-826B8 default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 8000. Change the default password in the camera web interface before enabling any remote access.
Does the Reolink RLK16-826B8 support ONVIF?
Yes, the Reolink RLK16-826B8 supports ONVIF at /onvif/device_service on port 8000. ONVIF enables integration with third-party NVR platforms and VMS software.