Reolink RLC-825A RTSP URL & Camera Test
Test your Reolink RLC-825A camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Reolink RLC-825A uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Reolink RTSP URL pattern
The RTSP URL pattern for Reolink RLC-825A cameras:
rtsp://<user>:<pass>@<ip>:554/h264Preview_01_main
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 8000
- RTSP: 554
ONVIF path
Reolink cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Reolink camera stream
Paste your Reolink RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Reolink RLC-825A?
The Reolink RLC-825A uses RTSP URL: rtsp://
What are the default ports for the Reolink RLC-825A?
Reolink RLC-825A default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 8000. Change the default password in the camera web interface before enabling any remote access.
Does the Reolink RLC-825A support ONVIF?
Yes, the Reolink RLC-825A supports ONVIF at /onvif/device_service on port 8000. ONVIF enables integration with third-party NVR platforms and VMS software.