Lorex Camera RTSP URL Guide & Tester
Test any Lorex IP camera stream instantly. Lorex cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Lorex RTSP URL pattern
The RTSP URL pattern for Lorex cameras:
rtsp://<user>:<pass>@<ip>:554/cam/realmonitor?channel=1&subtype=0
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Lorex cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Lorex camera stream
Paste your Lorex RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
Why is my Lorex camera RTSP stream not working?
Common Lorex RTSP issues: (1) Wrong password — verify credentials. (2) Wrong stream path — use rtsp://
How do I fix Lorex camera offline status?
Check physical power and network connection first. Verify the camera IP address with SADP or a network scanner. Reset the camera if needed. Update firmware to the latest version. Check for IP address conflicts on your network.