Lorex Camera RTSP URL Guide & Tester
Test any Lorex IP camera stream instantly. Lorex cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Lorex RTSP URL pattern
The RTSP URL pattern for Lorex cameras:
rtsp://<user>:<pass>@<ip>:554/cam/realmonitor?channel=1&subtype=0
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Lorex cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Lorex camera stream
Paste your Lorex RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the ONVIF endpoint for Lorex cameras?
Lorex cameras use the ONVIF endpoint at /onvif/device_service on port 80. You can verify ONVIF connectivity using the CamCheck tool above. Enable ONVIF in the camera web interface if it is not active by default.
Does Lorex support ONVIF Profile S and G?
Lorex cameras support ONVIF Profile S (streaming) and most support Profile G (recording) and Profile T (H.265 + metadata). Check the Lorex product specifications page for the exact ONVIF profiles supported by your model.