Foscam Camera RTSP URL Guide & Tester
Test any Foscam IP camera stream instantly. Foscam cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Foscam RTSP URL pattern
The RTSP URL pattern for Foscam cameras:
rtsp://<user>:<pass>@<ip>:88/videoMain
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 88
- HTTPS: 443
- ONVIF: 888
- RTSP: 88
ONVIF path
Foscam cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Foscam camera stream
Paste your Foscam RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
Why is my Foscam camera RTSP stream not working?
Common Foscam RTSP issues: (1) Wrong password — verify credentials. (2) Wrong stream path — use rtsp://
How do I fix Foscam camera offline status?
Check physical power and network connection first. Verify the camera IP address with SADP or a network scanner. Reset the camera if needed. Update firmware to the latest version. Check for IP address conflicts on your network.