Foscam Camera RTSP URL Guide & Tester
Test any Foscam IP camera stream instantly. Foscam cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Foscam RTSP URL pattern
The RTSP URL pattern for Foscam cameras:
rtsp://<user>:<pass>@<ip>:88/videoMain
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 88
- HTTPS: 443
- ONVIF: 888
- RTSP: 88
ONVIF path
Foscam cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Foscam camera stream
Paste your Foscam RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the default RTSP URL format for Foscam cameras?
The Foscam RTSP URL format is: rtsp://
What port does Foscam use for RTSP?
Foscam cameras use RTSP port 554 by default. Some models may use non-standard ports — check the camera web interface under Network > RTSP Settings. Open TCP port 554 on your firewall for remote RTSP access.