Foscam R2M RTSP URL & Camera Test
Test your Foscam R2M camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Foscam R2M uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Foscam RTSP URL pattern
The RTSP URL pattern for Foscam R2M cameras:
rtsp://<user>:<pass>@<ip>:88/videoMain
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 88
- HTTPS: 443
- ONVIF: 888
- RTSP: 88
ONVIF path
Foscam cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Foscam camera stream
Paste your Foscam RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Foscam R2M?
The Foscam R2M uses RTSP URL: rtsp://
What are the default ports for the Foscam R2M?
Foscam R2M default ports: RTSP 88, HTTP 88, HTTPS 443, ONVIF 888. Change the default password in the camera web interface before enabling any remote access.
Does the Foscam R2M support ONVIF?
Yes, the Foscam R2M supports ONVIF at /onvif/device_service on port 888. ONVIF enables integration with third-party NVR platforms and VMS software.