Amcrest AD2000 RTSP URL & Camera Test
Test your Amcrest AD2000 camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Amcrest AD2000 uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Amcrest RTSP URL pattern
The RTSP URL pattern for Amcrest AD2000 cameras:
rtsp://<user>:<pass>@<ip>:554/cam/realmonitor?channel=1&subtype=0
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Amcrest cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Amcrest camera stream
Paste your Amcrest RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Amcrest AD2000?
The Amcrest AD2000 uses RTSP URL: rtsp://
What are the default ports for the Amcrest AD2000?
Amcrest AD2000 default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Amcrest AD2000 support ONVIF?
Yes, the Amcrest AD2000 supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.