Uniview Camera RTSP URL Guide & Tester
Test any Uniview IP camera stream instantly. Uniview cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Uniview RTSP URL pattern
The RTSP URL pattern for Uniview cameras:
rtsp://<user>:<pass>@<ip>:554/unicast/c1/s0/live
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Uniview cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Uniview camera stream
Paste your Uniview RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
Why is my Uniview camera RTSP stream not working?
Common Uniview RTSP issues: (1) Wrong password — verify credentials. (2) Wrong stream path — use rtsp://
How do I fix Uniview camera offline status?
Check physical power and network connection first. Verify the camera IP address with SADP or a network scanner. Reset the camera if needed. Update firmware to the latest version. Check for IP address conflicts on your network.