Uniview Camera RTSP URL Guide & Tester
Test any Uniview IP camera stream instantly. Uniview cameras use RTSP for live streaming — paste your URL below to verify reachability, detect codec, and check resolution without installing any software.
Uniview RTSP URL pattern
The RTSP URL pattern for Uniview cameras:
rtsp://<user>:<pass>@<ip>:554/unicast/c1/s0/live
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Uniview cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Uniview camera stream
Paste your Uniview RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the default RTSP URL format for Uniview cameras?
The Uniview RTSP URL format is: rtsp://
What port does Uniview use for RTSP?
Uniview cameras use RTSP port 554 by default. Some models may use non-standard ports — check the camera web interface under Network > RTSP Settings. Open TCP port 554 on your firewall for remote RTSP access.