Uniview IPC2228SS-DF40K-I0 RTSP URL & Camera Test
Test your Uniview IPC2228SS-DF40K-I0 camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Uniview IPC2228SS-DF40K-I0 uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Uniview RTSP URL pattern
The RTSP URL pattern for Uniview IPC2228SS-DF40K-I0 cameras:
rtsp://<user>:<pass>@<ip>:554/unicast/c1/s0/live
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Uniview cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Uniview camera stream
Paste your Uniview RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Uniview IPC2228SS-DF40K-I0?
The Uniview IPC2228SS-DF40K-I0 uses RTSP URL: rtsp://
What are the default ports for the Uniview IPC2228SS-DF40K-I0?
Uniview IPC2228SS-DF40K-I0 default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Uniview IPC2228SS-DF40K-I0 support ONVIF?
Yes, the Uniview IPC2228SS-DF40K-I0 supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.