Swann SWWHD-MASCAM RTSP URL & Camera Test
Test your Swann SWWHD-MASCAM camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Swann SWWHD-MASCAM uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Swann RTSP URL pattern
The RTSP URL pattern for Swann SWWHD-MASCAM cameras:
rtsp://<user>:<pass>@<ip>:554/channel1
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 85
- HTTPS: 443
- ONVIF: 85
- RTSP: 554
ONVIF path
Swann cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Swann camera stream
Paste your Swann RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Swann SWWHD-MASCAM?
The Swann SWWHD-MASCAM uses RTSP URL: rtsp://
What are the default ports for the Swann SWWHD-MASCAM?
Swann SWWHD-MASCAM default ports: RTSP 554, HTTP 85, HTTPS 443, ONVIF 85. Change the default password in the camera web interface before enabling any remote access.
Does the Swann SWWHD-MASCAM support ONVIF?
Yes, the Swann SWWHD-MASCAM supports ONVIF at /onvif/device_service on port 85. ONVIF enables integration with third-party NVR platforms and VMS software.