topic ptz-camera-guide RTSP URL & Camera Test
Test your topic ptz-camera-guide camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The topic ptz-camera-guide uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
topic RTSP URL pattern
The RTSP URL pattern for topic ptz-camera-guide cameras:
rtsp://<user>:<pass>@<ip>:554/stream
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- ONVIF: 80
- RTSP: 554
ONVIF path
topic cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your topic camera stream
Paste your topic RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
Can I control PTZ cameras over RTSP?
RTSP only handles media streaming — PTZ control uses ONVIF (port 80), VAPIX (Axis), or proprietary protocols. For full PTZ control with third-party software, use ONVIF Profile S or T. RTSP URL for a PTZ camera is the same format as any IP camera from the same brand.
What is the RTSP URL for a PTZ camera?
PTZ cameras use the same RTSP URL format as their fixed-camera counterparts from the same brand. Hikvision PTZ: rtsp://