Hikvision DS-2DE4A225IWG RTSP URL & Camera Test
Test your Hikvision DS-2DE4A225IWG camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Hikvision DS-2DE4A225IWG uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Hikvision RTSP URL pattern
The RTSP URL pattern for Hikvision DS-2DE4A225IWG cameras:
rtsp://<user>:<pass>@<ip>:554/Streaming/Channels/101
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Hikvision cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Hikvision camera stream
Paste your Hikvision RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Hikvision DS-2DE4A225IWG?
The Hikvision DS-2DE4A225IWG uses RTSP URL: rtsp://
What are the default ports for the Hikvision DS-2DE4A225IWG?
Hikvision DS-2DE4A225IWG default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Hikvision DS-2DE4A225IWG support ONVIF?
Yes, the Hikvision DS-2DE4A225IWG supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.