Hanwha XNO-8020R RTSP URL & Camera Test
Test your Hanwha XNO-8020R camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Hanwha XNO-8020R uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Hanwha RTSP URL pattern
The RTSP URL pattern for Hanwha XNO-8020R cameras:
rtsp://<user>:<pass>@<ip>:554/profile2/media.smp
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Hanwha cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Hanwha camera stream
Paste your Hanwha RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Hanwha XNO-8020R?
The Hanwha XNO-8020R uses RTSP URL: rtsp://
What are the default ports for the Hanwha XNO-8020R?
Hanwha XNO-8020R default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Hanwha XNO-8020R support ONVIF?
Yes, the Hanwha XNO-8020R supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.