Dahua IPC-HDBW4849H-ZAS RTSP URL & Camera Test
Test your Dahua IPC-HDBW4849H-ZAS camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Dahua IPC-HDBW4849H-ZAS uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Dahua RTSP URL pattern
The RTSP URL pattern for Dahua IPC-HDBW4849H-ZAS cameras:
rtsp://<user>:<pass>@<ip>:554/cam/realmonitor?channel=1&subtype=0
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Dahua cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Dahua camera stream
Paste your Dahua RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Dahua IPC-HDBW4849H-ZAS?
The Dahua IPC-HDBW4849H-ZAS uses RTSP URL: rtsp://
What are the default ports for the Dahua IPC-HDBW4849H-ZAS?
Dahua IPC-HDBW4849H-ZAS default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Dahua IPC-HDBW4849H-ZAS support ONVIF?
Yes, the Dahua IPC-HDBW4849H-ZAS supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.