Axis Q3626-VE RTSP URL & Camera Test
Test your Axis Q3626-VE camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Axis Q3626-VE uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Axis RTSP URL pattern
The RTSP URL pattern for Axis Q3626-VE cameras:
rtsp://<user>:<pass>@<ip>/axis-media/media.amp
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Axis cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Axis camera stream
Paste your Axis RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Axis Q3626-VE?
The Axis Q3626-VE uses RTSP URL: rtsp://
What are the default ports for the Axis Q3626-VE?
Axis Q3626-VE default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Axis Q3626-VE support ONVIF?
Yes, the Axis Q3626-VE supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.