Axis P1468 RTSP URL & Camera Test
Test your Axis P1468 camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Axis P1468 uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Axis RTSP URL pattern
The RTSP URL pattern for Axis P1468 cameras:
rtsp://<user>:<pass>@<ip>/axis-media/media.amp
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Axis cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Axis camera stream
Paste your Axis RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Axis P1468?
The Axis P1468 uses RTSP URL: rtsp://
What are the default ports for the Axis P1468?
Axis P1468 default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Axis P1468 support ONVIF?
Yes, the Axis P1468 supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.