Axis F34 Main Unit RTSP URL & Camera Test
Test your Axis F34 Main Unit camera stream instantly: paste the RTSP URL below to check reachability, codec, and resolution from our servers. The Axis F34 Main Unit uses RTSP path pattern rtsp:// and supports ONVIF at /onvif/device_service.
Axis RTSP URL pattern
The RTSP URL pattern for Axis F34 Main Unit cameras:
rtsp://<user>:<pass>@<ip>/axis-media/media.amp
Replace <user>, <pass>, and <ip>
with your camera's credentials and IP address. Never leave default credentials
unchanged — update them and use CamCheck below to verify the stream.
Default ports
- HTTP: 80
- HTTPS: 443
- ONVIF: 80
- RTSP: 554
ONVIF path
Axis cameras support ONVIF at /onvif/device_service. Use an ONVIF
client (e.g. ONVIF Device Manager) to discover and configure the camera.
Test your Axis camera stream
Paste your Axis RTSP URL below (use your real IP and credentials). StreamProbe will connect from our servers to verify reachability, detect codec and resolution, and confirm the stream is live — no software required.
Frequently asked questions
What is the RTSP URL for the Axis F34 Main Unit?
The Axis F34 Main Unit uses RTSP URL: rtsp://
What are the default ports for the Axis F34 Main Unit?
Axis F34 Main Unit default ports: RTSP 554, HTTP 80, HTTPS 443, ONVIF 80. Change the default password in the camera web interface before enabling any remote access.
Does the Axis F34 Main Unit support ONVIF?
Yes, the Axis F34 Main Unit supports ONVIF at /onvif/device_service on port 80. ONVIF enables integration with third-party NVR platforms and VMS software.